The Sector enclosures are designed to be installed in a corner against finished walls; they are crafted from 1/4" tampered glass. The enclosures come in two sizes with three types of glass: clear, frosted, and rain glass. The rain glass is the newest type of glass introduced by DreamLine; it is semi-transparent with a textured surface on one side. The Sector enclosure is based on a half-circle shape surrounded by an anodized aluminum frame with polished chrome finish. It consists of two stationary panels mounted on both sides adjacent to the walls, and the door (in the middle of the enclosure) is made of two molded pieces that swing open to the sides. The door is sealed with a magnetic door latch running the full length of the door's edge. The enclosure is 72 7/8" tall, including the frame
The Sector enclosures come in two sizes:
SHEN-7031316-01 with clear glass (SHEN-7031316-01-FR frosted glass, and SHEN-7031316-01-RN rain glass) is designed to enclose walls (from the inside corner) 30 3/4" x 30 3/4". Each stationary panel is 8 5/8" wide; when the door is fully opened it leaves a 16 1/2" walk-in opening. This enclosure can be installed on a corresponding DreamLine white acrylic shower base: model SHTR-7032320-00.
SHEN-7035356-01 with clear glass (SHEN-7035356-01-FR frosted glass, and SHEN-7035356-01-RN rain glass) is designed to enclose walls (from the inside corner) 34 3/4" x 34 3/4". Each stationary panel is 16 1/2" wide; when the door is fully opened it leaves a 21 1/4" walk-in opening. This enclosure can be installed on a corresponding DreamLine white acrylic shower base: model SHTR-7036360-00.
Dreamline recommends, in order to insure long lasting life of the glass shower doors, to wipe them off after each use with a soft cloth. Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup. Never use abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface. Never use bristle brushes or abrasive sponges.
To assure a long lasting finish the owner needs to wipe off the metal parts after each use with a soft cloth. Never use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, the surface needs to be rinsed as soon as possible to prevent finish corrosion. After cleaning the shiny finishes, they need to be rinsed thoroughly and wiped dry with soft cloth. When applying stainless steel cleaner or polish never use abrasive sponge or cloth, steel wool or wired brushes.